基于改进云推理算法的塔架结构损伤识别

为了解决塔架结构的损伤识别问题,提出了基于应变能和改进云推理算法的损伤识别方法。首先描述了云模型的基本理论和数字特征,并给出了模态应变能的基本公式;然后分析了X条件云发生器和Y条件云发生器的基本算法和运行步骤,借助灰云模型建立相应的前件云和后件云规则,考虑了测量噪声的影响,利用云发生器生成多组云滴,并利用多模式下云滴的确定度和生成值构建了基本云推理算法及其损伤识别指标。基本云推理算法中常会产生不均匀发散的云滴,从而使计算结果产生一定的偏差,为了降低云滴发散产生的偏差影响,提出了基于损伤模式数量加权的云推理改进策略。计算结果表明:云推理算法可以较好地应用于塔架结构的损伤识别,其识别结果明显优于传统的应变能耗散率指标方法;而改进云推理算法进一步提高了识别的精度,优于基本云推理算法。     

Calculus of variations as a basic tool for modelling of reaction paths and localisation of stationary points on potential energy surfaces

ABSTRACT

The theory of calculus of variations is a mathematical tool which is widely used in different scientific areas in particular in physics and chemistry. This theory is strongly related with optimisation. In fact the former seeks to optimise an integral related with some physical magnitude over some space to an extremum by varying a function of the coordinates. On the other hand, reaction paths and potential energy surfaces, in particular their stationary points, are the basis of many chemical theories, in particular reactions rate theories. We present a review where it is gathered together the variational nature of many types of reaction paths: steepest descent, Newton trajectories, artificial force induced reaction (AFIR) paths, gradient extremals, and gentlest ascent dynamics (GAD) curves. The variational basis permits to select the best optimisation technique in order to locate important theoretical objects on a potential energy surface.     

Advances in stable and flexible perovskite solar cells

Roll-to-roll (R2R) production is an innovative approach and is fast becoming a very popular industrial method for high throughput and mass production of solar cells. Replacement of costly indium tin oxide (ITO), which conventionally has served as the transparent electrode would be a great approach for roll to roll production of flexible cost effective solar cells. Indium tin oxide (ITO) and fluorine-doped tin oxide (FTO) are brittle and ultimately limit the device flexibility. Perovskite solar cells (PSCs) have been the centre of photovoltaic research community during the recent years owing to its exceptional performance and economical prices. The best reported PSCs fabricated by employing mesoporous TiO₂ layers require elevated temperatures in the range of 400–500 °C which limits its applications to solely glass substrates. In such a scenario developing flexible PSCs technology can be considered a suitable and exciting arena from the application point of view, them being flexible, lightweight, portable, and easy to integrate over both small, large and curved surfaces.     

An improved evaluation of the neutron background in the PandaX-Ⅱ experiment

In dark matter direct detection experiments,neutron is a serious source of background,which can mimic the dark matter-nucleus scattering signals.In this paper,we present an improved evaluation of the neutron background in the PandaX-II dark matter experiment by a novel approach.Instead of fully relying on the Monte Carlo simulation,the overall neutron background is determined from the neutron-induced high energy signals in the data.In addition,the probability of producing a dark-matter-like background per neutron is evaluated with a complete Monte Carlo generator,where the correlated emission of neutron(s)andγ(s)in the(α,n)reactions and spontaneous fissions is taken into consideration.With this method,the neutron backgrounds in the Run 9(26-ton-day)and Run 10(28-ton-day)data sets of PandaX-II are estimated to be(0.66±0.24)and(0.47±0.25)events,respectively.     

Transition probabilities of the X1Σ+, A1Π, B1Δ, C1Σ+, and D1Π states of the AlO+ cation

ABSTRACT

This study computes the potential energy curves of the X¹Σ⁺, A¹Π, B¹Δ, C¹Σ⁺, and D¹Π states of AlO⁺ cation and the transition dipole moments between them. The orders of the rotationless radiative lifetimes are 10–100?μs for the A¹Π state, 1–1000?ms for the B¹Δ state, 10?ns for the first well and 100?ns for the second well of the C¹Σ⁺ state, and 1?μs for the D¹Π state. Emissions of the B¹Δ–A¹Π and D¹Π–C¹Σ⁺ systems are so weak that they are hardly measured via spectroscopy, the emissions of the C¹Σ⁺–X¹Σ⁺, C¹Σ⁺–A¹Π, and D¹Π–X¹Σ⁺ systems are so strong that they can be detected readily, and emissions of the A¹Π–X¹Σ⁺ and D¹Π–A¹Π systems can be observed through spectroscopy only by a significant effort. There is a strong great similarity between spontaneous emissions of the A¹Π–X¹Σ⁺ system of the AlO⁺ cation and the A²Π–X²Σ⁺ system of the AlO radical. The emissions of the A²Π–X²Σ⁺ system of the AlO radical have been measured in outer space Therefore, it is highly possible that the emissions of the A¹Π–X¹Σ⁺ system of the AlO⁺ cation can be detected in the astrophysical media.     

介质材料二次电子发射特性对微波击穿的影响

以介质填充的平行板放电结构为例,本文主要研究了介质填充后微波低气压放电和微放电的物理过程.为了探究介质材料特性对微波低气压放电和微放电阈值的影响,本文采用自主研发的二次电子发射特性测量装置,测量了7种常见介质材料的二次电子发射系数和二次电子能谱.依据二次电子发射过程中介质表面正带电的稳定条件,计算了介质材料稳态表面电位与二次电子发射系数以及能谱参数的关系.在放电结构中引入与表面电位相应的等效直流电场后,依据电子扩散模型和微放电中电子谐振条件,分别探讨了介质表面稳态表面电位的大小对微波低气压放电和微放电阈值的影响.结果表明,介质材料的二次电子发射系数以及能谱参数越大,介质材料的稳态表面电位也越大,对应的微波低气压放电和微放电阈值也越大.所得结论对于填充介质的选择有一定的理论指导价值.     

Generalizing Rosenbluth's Algorithm to Include Along‐the‐Chain Intramolecular Energies

We incorporate the Boltzmann factors for inter‐monomer bending energy into the monomer growth direction choice in Rosenbluth's algorithm to model chains of arbitrary nearest‐neighbor rigidity. This allows for the consideration of compact (bent state lower in energy), free (straight and bent state equal in energy), or extended chains (bent state higher). We validate against, and compare to, various other results, showing very good agreement with known results for short chains and demonstrate the ability to model chains up to 500 segments long, far beyond the length at which the normal Rosenbluth method becomes unstable for reasonable nonzero bending energies. This approach is easily generalizable both to other energies determinable during chain growth, for example, polymers composed of more than one type of monomer with differing monomer interaction energies, as well as to other chain production algorithms. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1684–1691     

Suppressing Strong Exciton–Phonon Coupling in Blue Perovskite Nanoplatelet Solids by Binary Systems

Quasi-two-dimensional (2D) perovskites are promising candidates for light generation owing to their high radiative rates. However, strong exciton–phonon interactions caused by mechanical softening of the surface act as a bottleneck in improving their suitability for a wide range of lighting and display applications. Moreover, it is not easily available to tune the phonon interactions in bulk films. Here, we adopt bottom-up fabricated blue emissive perovskite nanoplatelets (NPLs) as model systems to elucidate and as well as tune the phonon interactions via engineering of binary NPL solids. By optimizing component domains, the phonon coupling strength can be reduced by a factor of 2 driven by the delocalization of 2D excitons in out-of-plane orientations. It shows the picosecond energy transfer originated from the Förster resonance energy transfer (FRET) efficiently competes with the exciton–phonon interactions in the binary system.     

Manipulating Light-Induced Dynamic Macro-Movement and Static Photonic Properties within 1D Isostructural Hydrogen-Bonded Molecular Cocrystals

Smart molecular crystals with light-driven mechanical responses have received interest owing to their potential uses in molecular machines, artificial muscles, and biomimetics. However, challenges remain in control over both the dynamic photo-mechanical behaviors and static photonic properties of molecular crystals based on the same molecule. Herein, we show the construction of isostructural co-crystals allows their light-induced cracking and jumping behaviors (photosalient effect) to be controlled. Hydrogen-bonded co-crystals from 4-(1-naphthylvinyl)pyridine ( NVP ) with co-formers (tetrafluoro-4-hydroxybenzoic acid ( THA ) and tetrafluorobenzoic acid ( TA )) crystallize as isostructural crystals, but have different static and dynamic photo-mechanical behaviors. These differences are due to alternations in the orientation of NVP and hydrogen-bonding modes of the co-formers. After light activation, the 1D NVP-TA crystal splits and shears off within 1 s. For NVP-THA , its photostability and high quantum yield give novel photonic properties, including low optical waveguide loss, highly polarized anisotropy, and efficient up-conversion fluorescence.